Description
The T1000 aluminum radio truss tower is designed for medium and large-sized antenna installations (including large radio lines). In the first wind and icing zone it can be loaded1.5 meters square the surface of the antennas applied at the top. T1000 towers are usually mounted on the ground, the maximum available catalog height is30 meters, however we are currently testing the tower38 meters. If the installation is successful, we will introduce it as a product. Alupro also makes larger steel towers to order, and it is also possible to prepare a version of the T1000 tower for higher loads, or adapt it to work in other icy and wind zones (T1000 structures are used successfully in the Tyrolean mountains).
The T1000 towers stand outcomfortable ladderinternal, allowing for comfortable movement around the structure, easy to useSecuro anti-fall system, andcompatibility with accessoriesintended for M1000 series masts (safety flaps,outdoor platforms,landing separation crowns). Welcome to the sectionMast Accessoriesto learn more about this topic.
The set includes a set of welded (upper) and screwed (bottom) segments,the segments are 4 or 6 meters long, a set of screws and a lightning rod.
Selected Catalog Cards:
Multimedia: :
Technical parameters: :
| Parameter | Property |
|---|---|
| Width at the top | 1000 mm |
| Wind load capacity (I zone and wind load) | 1.5 square meters |
| Base width for h=4 m | 1200mm |
| Base width for h=8 m | 1200mm |
| Base width for h=12 m | 1600mm |
| Base width for h=16 m | 2000mm |
| Base width for h = 24 m | 2800mm |
| Base width for h=28 m | 3200mm |
| Base width for h=30 m | 3600mm |
| The height of a single segment | 4 m |
| Tower mass 4 m | 24kg |
| Tower mass 8 m | 52 kg |
| Tower mass 12 m | 73 kg |
| Tower mass 16 m | 110 kg |
| Tower mass 20 m | 190 kg |
| Tower mass 24 m | 270 kg |
| Tower mass 28 m | 380 kg |
| Tower mass 30 m | 460 kg |
| Material | AW6060/6063 T6 |
| Support pipes/curbs (depending on height) | fi60x2/3, fi70x3/5, fi80x3/5, fi100x5, fi120x5/8 |
| Horizontal lacing (depending on height) | fi30x2, fi30x3 fi35x2, fi35x3, fi40x3 |
| Diagonal lacing (depending on height) | fi30x2, fi30x3, fi35x2, fi35x3, fi40x3, fi50x3, fi60x3 |
| Welding technique | TIG |
| Connecting segments | Flanges with M10/M12,M14/M16/M20 screws, 9 pieces per section |
| Tower mounting | Three-point, pin (prefabricated element) or 3x collar/flange (AluPro anchors for reinforced concrete) |
