Description
The T500 series aluminum telecommunications truss tower was created as a cost-effective alternative to aluminum masts. It is used wherever there are no high wind load requirements (the planned area of the antennas does not exceed 0.5 sq m.) and there is no place or possibility to anchor the guy wires of a traditional mast. The T500 tower is suitable for installing sector antennas, omnidirectional antennas and small radio lines. Optionally, it is available with steps welded to the curb pipe to facilitate movement around the structure. The maximum height is 30 meters.If you need a higher structure or greater wind load capacity - check out the offer of AluPro T1000 aluminum towers.
The set includes a set of welded (upper) and screwed (lower) segments, the segments are 4 meters long or 6 meters for lower sections from the T500-16 version upwards, a set of screws and a lightning rod.
Selected catalog cards:
Multimedia:
Technical parameters:
| Parameter | Property |
|---|---|
| Width at the top | 500mm |
| Wind load capacity (1st area and wind zone) | 0.5 sq m |
| Base width for h=4m | 500mm |
| Base width for h=8m | 750mm |
| Base width for h=12 m | 1000 mm |
| Base width for h=16 m | 1500mm |
| Base width for h = 24m | 2500mm |
| The height of a single segment | 4 m |
| Tower mass 4 m | 12 kg |
| Tower mass 8 m | 30 kg |
| Tower mass 12 m | 52 kg |
| Tower mass 16 m | 83 kg |
| Tower mass 20 m | 140 kg |
| Tower mass 24 m | 170 kg |
| Material | AW6060/6063 T6 |
| Support pipes/curbs (depending on height) | fi35x1.5, fi5x2, fi40x2, fi50x2, fi60x2, fi60x3, fi70x3, fi70x5 |
| Horizontal lacing (depending on height) | fi20x2, fi25x2, fi30x2, fi35x2, fi40x2 |
| Diagonal lacing (depending on height) | fi 20×2, fi 25×2, fi30x2, fi 35×2, fi 40×2, fi 45×2 |
| Welding technique | TIG |
| Connecting segments | Flanged, M8/M10/M12 screws, 18 pcs. per segment |
| Tower mounting | Three-point, pin (prefabricated element) or 3x collar/flange (AluPro anchors for reinforced concrete) |
