T500 series aluminum telecommunications truss tower
The cost-effective T500 series towers are suitable for use wherever cost is a factor and high structural rigidity is not required.
Goes well with
Only relationships confirmed in the descriptions and catalog.
Click an item in the illustration or a category below.
The Summit and the Lightning Strike
Mast top: lightning protection cone and antenna adapter.
Crowns and separation platforms
They are spaced apart from each other.
Antenna brackets
Brackets for flat antennas and radio lines.
Security Measures
Anti-climb protection and fall arrest system.
Other items for this product
Mounted on
Technical Specifications
Wymiary i masa według wysokości
rysunek poglądowy, szerokości powiększone 2,5×Najedź na kolumnę, żeby podświetlić wieżę i wartości. „–” oznacza brak danych w karcie.
01Design
- Width at the top
- 500 mm
- Wind Resistance (Zone I for structural and wind loads)
- 0,5 m²
- The height of a single segment
- 4 m
02Materiał i wykonanie
- Material
- AW6060/6063 T6
- Support pipes/curbs (depending on height)
- ø35×1.5ø5×2ø40×2ø50×2ø60×2ø60×3ø70×3ø70×5
- Horizontal lacing (depending on height)
- ø20×2ø25×2ø30×2ø35×2ø40×2
- Diagonal hatching (depending on height)
- ø20×2ø25×2ø30×2ø35×2ø40×2ø45×2
- Welding technique
- TIG
03Montaż
- Joining Segments
- Flanged, M8/M10/M12 screws, 18 pcs. per segment
- Tower mounting
- Three-point, pin (prefabricated element) or 3x collar/flange (AluPro anchors for reinforced concrete)
TECHNICAL DOCUMENTATION
Documents
- 8
- CAD
- in response to a request
- Access
- without a form
Description
The T500 series aluminum lattice telecommunications tower was developed as a cost-effective alternative to aluminum masts. It is used wherever there are no stringent wind load requirements (the projected antenna area does not exceed 0.5 sq m.) and there is no place or possibility to anchor the guy wires of a traditional mast. The T500 tower is suitable for installing sector antennas, omnidirectional antennas and small radio lines. Optionally, it is available with steps welded to the curb pipe to facilitate movement around the structure. The maximum height is 30 meters.If you need a taller structure or higher wind load capacity, check out the AluPro T1000 aluminum towers.
The set includes a set of welded (upper) and screwed (lower) segments, the segments are 4 meters long or 6 meters for lower sections from the T500-16 version upwards, a set of screws and a lightning rod.
price update: 2024-03-14
Projects and Photos
